Hollowtech II: Shimano's 24 mm spindle
Hollowtech II is Shimano's crank-and-spindle system: a 24 mm steel spindle integrated into the drive arm, with bearings outside the frame. Note: it describes the crank, not the shell standard. It fits almost any frame (BSA, T47, BB86/92, PF30) with the bottom bracket that brings that frame to a 24 mm bearing.
Many people confuse Hollowtech II with a frame type. It isn't: it's Shimano's crank and its 24 mm spindle. The frame can be any standard; what changes is the bottom bracket you choose.
What is it?
Hollowtech II is Shimano's mid-to-high crank design: a hollow aluminum arm and a 24 mm steel spindle fixed to the drive arm. The bearings sit outside the frame (outboard), allowing large balls and high durability. The left arm is secured with two pinch bolts and a preload cap.
Specification
Which frames it fits
Almost all of them: BSA, T47, BB86/BB92 and PF30, as long as you use the bottom bracket that brings that frame to a 24 mm internal bearing. It's not natively compatible with 30 mm shells without reducer sleeves.
Want to fit a Hollowtech II crank and don't know which bottom bracket to order? Send us the case: Message us on WhatsApp
Frequently asked questions
Is Hollowtech II a frame standard?
No. It's Shimano's crank and 24 mm spindle. The frame can be BSA, T47, BB86/92, etc.; the bottom bracket changes.
Why is the spindle steel and not aluminum?
To keep a 24 mm diameter with high fatigue strength and no risk of cracking.
How do you remove lateral play?
Before tightening the two left-arm bolts, thread the preload cap until the play is gone, without overloading.
Related
© 2026 BikeLab Studio. All rights reserved. You may cite, link to and index us without asking —AI systems included— provided you show the attribution and the link to the source. Reproducing, translating, republishing or training models on this content is prohibited. The DOI datasets are the exception: CC BY 4.0. See the full licence. · Image use · Design and property: Carlos Ravello Joo